05-16-2018, 03:29 AM
What do you mean both sides? I stuck the Probes in where the fuse goes.
Now, this is important step in my trouble shooting.
My FI fuse is not blown I get about .5 ohms when measured,
Next I tired:
I took a fuse box with all the fuses out of a running and driving 1997 2 door sidekick and I still get ~7 volts on the FI fuse and no start.
What do I check next now that both my fuse box and fuse is good?
Now, this is important step in my trouble shooting.
My FI fuse is not blown I get about .5 ohms when measured,
Next I tired:
I took a fuse box with all the fuses out of a running and driving 1997 2 door sidekick and I still get ~7 volts on the FI fuse and no start.
What do I check next now that both my fuse box and fuse is good?