Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Totally confused
#1
Guys I'm lost I have bought a 96 tracker that had a blown head gasket . Removed the head took to the machine shop to be checked , had to be milled for flatness. Got back home and new gaskets put back together . Lined up the timing marks on the timing belt . crankshaft mark at 12 o'clock on the oil pump arrow the camshaft mark "E" on the mark on the valve cover installed belt . lined up the dizzy on number 4. And attempted to start . all I get is soaked plugs and not one cylinder even attempts to fire .

Any ideas guys . new plugs and wires ... New crankshaft sensor . already .
Reply


Messages In This Thread
Totally confused - by Dcoaks - 02-05-2018, 03:21 AM
RE: Totally confused - by fixkick - 02-05-2018, 04:18 AM
RE: Totally confused - by Dcoaks - 02-05-2018, 07:21 AM
RE: Totally confused - by Dcoaks - 02-06-2018, 12:19 AM
RE: Totally confused - by fixkick - 02-07-2018, 03:18 AM
RE: Totally confused - by fixkick - 02-07-2018, 03:20 AM
RE: Totally confused - by Dcoaks - 02-10-2018, 09:06 AM

Forum Jump:


Users browsing this thread: 3 Guest(s)