Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Timing belts
01-11-2018, 04:09 AM
Post: #1
Timing belts
my 91 Tracker has 88K on it and belt never changed. Think I should do that even though not an interference engine. Who makes the best replacement belt so I don't have to do this again? Thanks
Find all posts by this user
Quote this message in a reply
01-11-2018, 05:16 AM
Post: #2
RE: Timing belts
gates
even toyota ships new cars with gates.
for good reasons. IMO

http://www.fixkick.com
Visit this user's website Find all posts by this user
Quote this message in a reply
05-16-2018, 04:09 PM (This post was last modified: 05-16-2018 04:11 PM by mandyrose.)
Post: #3
RE: Timing belts
As fixkick mentioned, Toyotta and if you are familiar with suzuki, then IMO suzuki provides a good replacement.

Assignment Help
Find all posts by this user
Quote this message in a reply
05-16-2018, 10:00 PM
Post: #4
RE: Timing belts
there are no life time belts, not yours or the car, sorry. '
60k miles, 5 years, is the spec, how it goes depends on quality and running stress (rpm and heat)

https://www.rockauto.com/en/catalog/geo,...t+kit,5759


GATES belts
DAYCO
Delco

any dirt cheep belts, why do all that work only to put in junk parts. endless supply on ebay, (no name belts)

http://www.fixkick.com
Visit this user's website Find all posts by this user
Quote this message in a reply
07-06-2018, 05:52 PM
Post: #5
RE: Timing belts
<a href="http://www.google.com/">abc</a>
abc
http://www.google.com/


This is very good abc
Find all posts by this user
Quote this message in a reply
07-09-2018, 09:13 PM
Post: #6
RE: Timing belts
You're so right about no-name belts, fixkick. I made that mistake once... Never again. If you think you'll be saving money, you won't. lol
Find all posts by this user
Quote this message in a reply
07-09-2018, 09:51 PM
Post: #7
RE: Timing belts
yes the Chinese will clone anything, even me if I stop moving long enough, LOL!

http://www.fixkick.com
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)