engine rpm surge. help needed.

[fixkick]

very helpfull! thank you! got too busy sunday. i have a few days off coming up... so on the ISC while i have it off for cleaning i was planning to energize it on the bench to see if the motor is good. do you know if it recieves a full 12 volts or 5?

all good questions, my video shows doing just that

12vdc, is it,
and do not hold the connection , long, just 1second at time. or it overheats.
on the car it vibrates 200 times a second, PWM ways.
it will close by default. springs.
and 12vdc opens it, about 5mm?
mp4 video here. VLC can play it. (very very short video here, and to the point)

http://www.fixkick.com/videos/FLV-all/isc1.mp4