Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
96 Tracker to 96 Sidekick
07-08-2017, 09:34 AM
Post: #1
96 Tracker to 96 Sidekick
I'm looking for valve lifters (rocker arm adjusting screws) for my 96 tracker. The only thing I can find for the intake rockers is 96 sidekick at suzukicarparts.com They both are 1.6l 16 valve heads. Does anyone know if they are the same? The Suzuki part # is 1284661D00 for the sidekick and 96068601 for the GEO.
Find all posts by this user
Quote this message in a reply
07-08-2017, 09:52 PM
Post: #2
RE: 96 Tracker to 96 Sidekick
drawing ID 9 and 10 (book old)
12842-32411
no they are not the same part
12842-32411 left side.
your above is right.

16/19 id here
https://www.suzukicarparts.com/parts/199...CallOut=19

http://fixkick.com/
Visit this user's website Find all posts by this user
Quote this message in a reply
07-08-2017, 11:57 PM
Post: #3
RE: 96 Tracker to 96 Sidekick
Do you know where I can get the intake rocker arm adjusting screws for the 96 Geo Tracker?
Find all posts by this user
Quote this message in a reply
07-10-2017, 12:59 PM
Post: #4
RE: 96 Tracker to 96 Sidekick
If you just need the adjusting screws, you can fab them from good quality bolts
Find all posts by this user
Quote this message in a reply
07-10-2017, 09:51 PM
Post: #5
RE: 96 Tracker to 96 Sidekick
the screws are not simple screws
there are case hardened , and very special for this purpose.
and metric.

http://fixkick.com/
Visit this user's website Find all posts by this user
Quote this message in a reply
07-10-2017, 10:28 PM (This post was last modified: 07-10-2017 10:29 PM by fetcher.)
Post: #6
RE: 96 Tracker to 96 Sidekick
I don't see any magic with those parts:
   

If the suzuki ones are too hard to get or cost too much,
the first thing I would think is there must be some other
engine in the world that has like 7mm fine thread 22 mm
long lash adjustment screws. If there happens to be no
such engine, I would use 10.9 bolts with small hex or
allen head. Bolt end would be polished like the original.
Find all posts by this user
Quote this message in a reply
07-12-2017, 11:52 PM
Post: #7
RE: 96 Tracker to 96 Sidekick
The screw in your picture is for the exhaust valve rocker. I need the intake valve rocker screw. It has a ball end that rides in the rocker rail.
Find all posts by this user
Quote this message in a reply
07-14-2017, 01:34 AM
Post: #8
RE: 96 Tracker to 96 Sidekick
And it hangs on a spring, but I'm not about to give mine up. What happened to the ones you have?
Find all posts by this user
Quote this message in a reply
07-14-2017, 02:34 AM (This post was last modified: 07-14-2017 04:22 AM by fetcher.)
Post: #9
RE: 96 Tracker to 96 Sidekick
I think this is 12846-61D00-000
   
After quick look, I could not find a U.S. seller.
A number of outside U.S. sites list it as available
Item might also be used on motorcycles.
Find all posts by this user
Quote this message in a reply
07-14-2017, 04:20 AM
Post: #10
RE: 96 Tracker to 96 Sidekick
In UAE, http://en.gforceparts.com $1.71 ea.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)