Fuel pump access

[john110]

If you wish to make an access hatch, Pavel14 is your go to guy. From what I have seen, his work is top notch.
But, I don't think that you have conclusively established that there is nothing wrong with the fuel pressure
regulator since the fuel will flow towards the path of least resistance. To address the poor fuel flow you have
described, I would first change out the filter since it's much easier to do than pulling the pump, especially so
in your case. You can get a no name one for about $10.00, although it will likely be Chinese. I myself installed
the $10.00 one. When it received it, I found that it came with steel banjo washers. Since I could not get a seal with
the steel banjo washers, I re used the old brass ones.

thanks a lot Fetcher..... yes I'll begin with the fuel filter..... I was looking at it this pm.... it's way less rusted than on my Tracker...... so I'll prob be able to unscrew it !!