1.6 Swap Injecton problem

[loe92]

why not weld matching flange to the cat and bolt it on.
doing no damage to the header at all.
cat back , anything works, even straight pipe and no muff.

Hi man!!!!!

The emission test is passed !!!

The man who did the test told me that he never saw a samurai running so good 

I have just a last question.


On the Catalytic converter that I have mounted on the car,

There is a second O2 sensor with two wires.

I know that one wire goes to the A16 pin on the ECU and the other goes to the A24 on the ecu.

In the electrical schematics of the samurai (in the 1.6 is the same thing) I see that these two wires goes from the ecu to the egr sensor temperature that I don’t have on my car.

My question is:

can I try to connect this sensor on the 1.6 ecu or this is useless?

The car now is running perfectly it’s just a curiosity.