02-02-2017, 03:59 AM
the cover looks like the one in the diagram. i think i have a bad ground in my illumination lights because the fuse is good checked it with an ohm meter,and i have 12v to the dome light and if i take it off and run 12v positive and negative it works, but when i hook it back up nothing..my headlights work and so does my signal and hazard just no tail lights or interior illumination like ashtray,heater,dash or dome. where is the common ground for this system? if i run 12v + to the red/yellow wire behind the dimmer it might work or check the light wires for 12v. is it possible to bypass the dimmer?