(02-21-2017, 05:47 AM)fixkick Wrote:(02-21-2017, 05:03 AM)MtTrails Wrote: OK, thanks for that great tip. I will do this today. Will anything be damaged if I were to force the cable back a bit to help free it up?should be ok
its stuck out so, going back in ,the other end at part ID20 , the bell crank is spring loaded.
id work it in/out, get oil or to start penetrating oil at first.
its just no different than bicycle brake cables... sheath and a center cable.
I got the upper end of the cable into a baggie of oil, but my transmission has the shifter cable connected here on the right side. Not the kick down cable.
![[Image: Screen_Shot_2017_02_20_at_7_16_17_PM_1.jpg]](https://s3.postimg.org/97errjm5b/Screen_Shot_2017_02_20_at_7_16_17_PM_1.jpg)