10-13-2013, 07:55 AM
nice video and clear
E mark on cam sprocket at 6-oclock
cams are on back side, clear
and it is gapped.
im so sorry , that is bad exhaust valve, i bet.
make sure no broken valve springs, here the big ones in valve stems
never know, , one beaks and you luck out.or anything looking funny those 4 valves on #1
if i did pull head, id do it cam first to get a better look at valves. im never too quick to condemn valve poppets (actual)
do not forget the cam caps and head are staged up and down using a differant older
good luck to you .
E mark on cam sprocket at 6-oclock
cams are on back side, clear
and it is gapped.
im so sorry , that is bad exhaust valve, i bet.
make sure no broken valve springs, here the big ones in valve stems
never know, , one beaks and you luck out.or anything looking funny those 4 valves on #1
if i did pull head, id do it cam first to get a better look at valves. im never too quick to condemn valve poppets (actual)
do not forget the cam caps and head are staged up and down using a differant older
good luck to you .
http://www.fixkick.com