ok my idea is this.
edited.
both VIA's must work, (via's are called plated through holes, by PCB lay out guys ,. me in old days)
the bottom VIA on yours , is not floating in the upper atmosphere, a cloud of copper metal . see white circle at bottom.
![[Image: 3_28_05_16_2_29_58.jpeg]](http://www.fixkick.com/bbs2/Suzuki-bbs/gallery/3_28_05_16_2_29_58.jpeg)
the top my be hopeless, but bottom can be fixed, i can say how, ask.
the worry is all that carbon, deep
warning 2
the PCB (that boaRD) Is multilayer board, and if that carbon seen there, wrecked the center layers, its hopeless, many do that. and become spare parts.
for the more healthy ECUs.
if was mine, id be looking for a spare 60a.
edited.
both VIA's must work, (via's are called plated through holes, by PCB lay out guys ,. me in old days)
the bottom VIA on yours , is not floating in the upper atmosphere, a cloud of copper metal . see white circle at bottom.
the top my be hopeless, but bottom can be fixed, i can say how, ask.
the worry is all that carbon, deep
warning 2
the PCB (that boaRD) Is multilayer board, and if that carbon seen there, wrecked the center layers, its hopeless, many do that. and become spare parts.
for the more healthy ECUs.
if was mine, id be looking for a spare 60a.
http://www.fixkick.com