1989 1.6l Auto
I replaced the gasket between the manifold and the downpipe 4 years ago because one of the nuts loosened and it blew the gasket out.
Now it hapened again a few months ago.
Should I just use lock washers to keep them from loosening or add lock-tight also?
P.S. They didn't have lock washers on them when I replaced the gasket the first time.
I replaced the gasket between the manifold and the downpipe 4 years ago because one of the nuts loosened and it blew the gasket out.
Now it hapened again a few months ago.
Should I just use lock washers to keep them from loosening or add lock-tight also?
P.S. They didn't have lock washers on them when I replaced the gasket the first time.