Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
vacuume nipple
#4
thanks for photo... 1000 words worth....

(03-06-2016, 01:25 AM)cje32303 Wrote: I am adding this picture, so you can see what I am talking about.:

looks to me, that that cone shape inside is 100% metal, scratch it , does it shine? yes then is metal and is on purpose.
it only take 8inches of vacuum to retract the Dash pot vacuum slave.
my guess, is this orifice (missing on mine)
is a safety upgrade. (keep in mind, this intake is used 1991 to 1995 and way longer world wide. (lots of possible revisions over time)

what happens (MAP based engines are risky)
if the hose falls off with a gaping huge hole there .?
the RPM screams, and on A/t cars drivers panic (never m/t cars as we do all shifting and RPM is not scary to us)
and if it screams, you get to be like Toyota with a $1.5billon lawsuit. (in the future i can see camera's watching drivers feet)
so easy to get super fast dangerous idle speeds.
and there are other hoses, too, that are man killers (not us) and that is the huge vacuum booster, air leaks there, wow. scream city.


the PCV valve is also an oriface.
one guy here found huge caddy engine, PCV valve here, and engine screamed.

nice discovery thanks for sharing !
http://www.fixkick.com
Reply


Messages In This Thread
vacuume nipple - by cje32303 - 03-05-2016, 07:57 AM
RE: vacuum nipple - by fixkick - 03-05-2016, 11:06 PM
RE: vacuume nipple - by cje32303 - 03-06-2016, 01:25 AM
RE: vacuume nipple - by fixkick - 03-06-2016, 02:23 AM

Forum Jump:


Users browsing this thread: 2 Guest(s)