12-09-2015, 05:21 AM
Day 2 of hard driving and the only code I'm getting is the code 24 VSS.
First off thank you so much for all the help and guidance. This was looking to be very daunting and you made it a success. I love to learn these things and pass on information when I can, so thank you.
One thing else I changed if this can help others is: I had my starter wired to a push button. If I started my car I would turn on the ignition then reach over and hit the starter. Even after fixing my IAT broken ground I was still having some problem with a hard rich start. If I cranked my starter then turned on my ignition I never had an issue. I've since rewired my starter to my key so there is virtually no delay allowing the motor to flood?? And I've had no issue. Thoughts on this discovery?
Lastly: Question is, what do I gain by installing the VSS in my cluster? My engine seems to be performing as it always has.
Thanks
Malcolm
First off thank you so much for all the help and guidance. This was looking to be very daunting and you made it a success. I love to learn these things and pass on information when I can, so thank you.
One thing else I changed if this can help others is: I had my starter wired to a push button. If I started my car I would turn on the ignition then reach over and hit the starter. Even after fixing my IAT broken ground I was still having some problem with a hard rich start. If I cranked my starter then turned on my ignition I never had an issue. I've since rewired my starter to my key so there is virtually no delay allowing the motor to flood?? And I've had no issue. Thoughts on this discovery?
Lastly: Question is, what do I gain by installing the VSS in my cluster? My engine seems to be performing as it always has.
Thanks
Malcolm