Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Cold Start Issues
#5
More reading has yielded these results...

I was confused on the what/where the IAC was. I've always called the ISC the IAC. This was because parts stores (rockauto) called them this.
   

So I have never actually pulled or cleaned the IAC which located under my throttle body! In reality I've only ever cleaned/changed out/swapped in my brothers ISC.

1. Can the IAC be cleaned? How? Just carb cleaner? (I see how to test them now, thanks!)




Thanks. I'll work on things tonight and post up what I find

*EDIT Just read your last response after I posted
Correct, I have no OBD2 style port. Only the little 6 pin DLC. Can I obtain the same Diagnostic info from this as I could from an OBD2 port using your write up for 92-95 DLC?
Reply


Messages In This Thread
Cold Start Issues - by Malcolm - 12-03-2015, 04:23 PM
RE: Cold Start Issues - by fixkick - 12-04-2015, 01:15 AM
RE: Cold Start Issues - by Malcolm - 12-04-2015, 03:34 AM
RE: Cold Start Issues - by Malcolm - 12-04-2015, 05:02 AM
RE: Cold Start Issues - by fixkick - 12-04-2015, 04:43 AM
RE: Cold Start Issues - by Malcolm - 12-04-2015, 01:20 PM
RE: Cold Start Issues - by fixkick - 12-05-2015, 12:33 AM
RE: Cold Start Issues - by Malcolm - 12-05-2015, 05:42 AM
RE: Cold Start Issues - by fixkick - 12-05-2015, 06:58 AM
RE: Cold Start Issues - by Malcolm - 12-09-2015, 05:21 AM
RE: Cold Start Issues - by fixkick - 12-09-2015, 06:06 AM
RE: Cold Start Issues - by Malcolm - 12-09-2015, 03:07 PM
RE: Cold Start Issues - by fixkick - 12-09-2015, 09:45 PM
RE: Cold Start Issues - by Malcolm - 12-14-2015, 07:30 AM
RE: Cold Start Issues - by fixkick - 12-14-2015, 11:23 AM

Forum Jump:


Users browsing this thread: 2 Guest(s)