My car just reached 170,00 miles today and it gave me the CEL lamp on. I proceeded to scan for codes, but it stayed on anyways. I then went to my NAG switch and slid it off and then on (like I always did the times before) to clear it and also pulled the dome fuse. But it stayed on. I then switched it off, (and left it off), put my clip on diag connector and got old 12's. I even forced an error and pulled ECT sensor and goth 14's.
Car runs fine (pending certain things to be checked as I have stated on other threads here). Do these tests tell that ECU is OK or not? Will failsafe get me errors with clip inserted or not?
Or everything is fine?
She starts fine, accelerates great, shifts fine and no RPM limit.
Thanks Fix.
Car runs fine (pending certain things to be checked as I have stated on other threads here). Do these tests tell that ECU is OK or not? Will failsafe get me errors with clip inserted or not?
Or everything is fine?
She starts fine, accelerates great, shifts fine and no RPM limit.
Thanks Fix.
Sidekick 94, 1.6L Engine 16v
4 spd Auto Tranny
4 Door 2RWD
Puerto Rico
4 spd Auto Tranny
4 Door 2RWD
Puerto Rico