12-21-2015, 10:21 AM
I jumped B11 to B12 then to the starter line and I don't have the hunting idle when I press the gas but I had it running for about 4 minutes today and it started doing it again. The MIL lights work on the dash but the illumination part still doesn't work and I'm getting the proper voltage through the wire. I also just found out that my temp gauge isn't working. I have a new engine temp sensor I just haven't installed it yet but will tomorrow. Not sure if that'll fix it but I already had the part so I figured I would install it anyway since I have it. I'm guessing to fix the hunting idle I would need the M/T ECU and I also have a high idle at 1800rmp.