Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
welding a broken clutch pedal back together
#15
(10-06-2015, 01:58 AM)GeoHacker Wrote: Here's that NAPA clutch pedal pad I mentioned, case it might help somebody. Same part number for brake and clutch.

http://www.napaonline.com/Catalog/Catalo...0257876077

The NAPA pedal cover is SQUARE and did NOT fit my 1996 Geo Tracker 3 spd, P/S, no air, CAMI.

The pedal cover that DID fit is referenced below (~30% wider at the top)

It's actually a Dorman HELP part # 20726 I got from Advance Auto.


(10-06-2015, 02:34 AM)woolverton Wrote: Thanks, I’ll check it out.

sidenote:
I sourced a Suzuki clutch pedal from Suzuki Depot in Garden Grove, CA.
Turns out the foot pad (and rubber cover) of the new pedal are not the same shape as the pedal I pulled out of my Geo. The original Geo foot pad is ~30% wider at the top as compared to my new Suzuki part.
It’s hard to believe that this element would be different between Geo and Suzuki circa 1997.
It’s more likely that the design has changed over time. Makes me wonder if this pedal is still in use in somewhere in the world.
Reply


Messages In This Thread
RE: welding a broken clutch pedal back together - by RenHoek - 08-15-2018, 05:19 AM

Forum Jump:


Users browsing this thread: 4 Guest(s)