Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
how to communicate Kia Pride 20pin Diagnustig connector
#23
Hi
Dear fixkick . i Do connect Directly TX pin on FT232rl to pin19 on diagnostics connector . And Ground to ground pin Connector , Run hi scan pro Software and open kia pride section . But not work and no answer from ECU
i have question . Do I need it ØŒThis Diagram Connect to FT232RL ?
[Image: x67fw7vimtce13vzrzr9f_s.jpg]
Reply


Messages In This Thread
RE: how to communicate Kia Pride 20pin Diagnustig connector - by hamed-pc - 12-04-2015, 11:14 PM

Forum Jump:


Users browsing this thread: 2 Guest(s)