01-27-2015, 10:58 PM
Hello all!
I have coolant leakage from the hose that runs from the pipe that goes on the back of the water pump to the heater core - see picture.
what is the best way to reach and tighten the clam on the hose. If I go from teh top, it seems I have to remove the entire throttle body to reach it. Or, should I take the starter off and try to reach from underneath?
Your suggestion is appreciated.
Regards,
Zackman
91 Sidekick JX, 8V, S. Carolina Car, 2 dr, 3 speed Auto Trani, Halifax, NS, Canada
I have coolant leakage from the hose that runs from the pipe that goes on the back of the water pump to the heater core - see picture.
what is the best way to reach and tighten the clam on the hose. If I go from teh top, it seems I have to remove the entire throttle body to reach it. Or, should I take the starter off and try to reach from underneath?
Your suggestion is appreciated.
Regards,
Zackman
91 Sidekick JX, 8V, S. Carolina Car, 2 dr, 3 speed Auto Trani, Halifax, NS, Canada