Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Help identifying
#6
checking the whole loop every inch, even the 2 schrader valve cores for leaking? is first, then the cab evap last..
the front receiver/drier too, and its hi/lo switch for leaks?

here it is,but how to split the case , not removed, might be possible

http://www.fixkick.com/AirCond/96-97set/...lowups.pdf

page 13 , in fsm , see the words, most difficult in first line.....

http://www.acksfaq.com/96-FSM-v1-1b-pdf.htm

says, remove blower motor case
http://www.acksfaq.com/96-FSM-v1-1a-pdf.htm
again page 13. two number 13s in a row. luck is not our friend.

i hope its not there but something dumb like the hi/lo switch cracked or schraders, leaking.
http://www.fixkick.com
Reply


Messages In This Thread
Help identifying - by Vitalie - 04-28-2014, 11:22 AM
RE: Help identifying - by fixkick - 04-28-2014, 09:55 PM
RE: Help identifying - by Vitalie - 04-29-2014, 12:11 AM
RE: Help identifying - by fixkick - 04-29-2014, 12:20 AM
RE: Help identifying - by Vitalie - 05-11-2014, 04:02 AM
RE: Help identifying - by fixkick - 05-11-2014, 07:33 AM

Forum Jump:


Users browsing this thread: 2 Guest(s)