Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Geo tracker ignition switch security screws
#2
(09-10-2019, 10:27 AM)digigeek19 Wrote: I was having trouble removing the security screws that hold on the ignition switch. I eventually got them off, but they aren't exactly in reusable condition. Does anyone know what type and size of screw I'd need for a replacement, and where to get them?
Thanks

that is normal,  the heads pop off day one installed, by design.
and screw works there , they are metric, of couse.
if you take the screw to any auto store, they have them there, just normal screwss.


off my I/P cluster removal page
12 years ago I wrote this.
Buy  two new  6mm OD   x 20mm    M6-20 pitch 1.0  long allen screws first, and the hex key to match

but might be 8mm,   just take the old screws to the store. 
diameter find then pitch.
http://www.fixkick.com
Reply


Messages In This Thread
RE: Geo tracker ignition switch security screws - by fixkick - 09-10-2019, 11:14 AM

Forum Jump:


Users browsing this thread: 2 Guest(s)