Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Rebuilt motor now putting it back in and have questions
#1
First question I have is what is this wire and where does it go?
Its located on the passenger side by the evap canister and comes out of a harness on the fender. Attachment 774/775 in 775 I believe it goes into that yellowish clear harness there. It is a white or yellow with blue stripe and what appears to be a purple/brown dot
   
https://photos.app.goo.gl/535AvsrMfyHdJS1u8
   
https://photos.app.goo.gl/nNCCkx51oc4JKuJo9

Also does anyone have a diagram showing the routing of the clutch cable? I know theres a clamp on the drivers fender but how it goes from there to the passenger side im not 100% sure.

Im sure I'll have more questions in near future Big Grin

Edit because im silly and didnt post the obvious: 1995 geo tracker 16v 1.6l, manual, 4 wd, hardtop, 2 door, does have ac.
Reply


Messages In This Thread
Rebuilt motor now putting it back in and have questions - by droptop351 - 08-22-2018, 11:41 AM

Forum Jump:


Users browsing this thread: 2 Guest(s)