Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
g16a no injector signal, error code 14
#17
ok, this time without mpi, I will look for parts for tbi. I forgot to add that there is no narrow lambda connected to ECU. It is strange because it has 4 wires, 2 are heating and 2 will be signal and lambda ground, normally it was 1 wired only signal?
I still have a board discovery f4 for frankenso, maybe I can run mpi on it.
Reply


Messages In This Thread
RE: g16a no injector signal, error code 14 - by likaon - 07-26-2018, 08:57 PM

Forum Jump:


Users browsing this thread: 2 Guest(s)