Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
g16a no injector signal, error code 14
#12
i have 2 weeks without car so now i can't check the serial number.
Engine is spi, but previous owner installed flange to mpi intake and run on custom ecu.
I don't want go to spi because: i don't have spi intake, and second, the car have high preasure fuel pump, working with mpi so i don't know that it will be work with spi.
I think that change spi to mpi was declared lean mixture on turbo.
Only in 3 weeks I will see the car and check the sensors, if I still do not have an injection signal from ecu I will use the ignition signal and connect to the piggyback, he can control the injection in full group, just for test.
Reply


Messages In This Thread
RE: g16a no injector signal, error code 14 - by likaon - 07-25-2018, 05:23 PM

Forum Jump:


Users browsing this thread: 2 Guest(s)