05-07-2018, 12:46 AM
First day off since last post, I'm headed in. I did check the 17mm bolt, but it was snug and visually didn't appear to have spun so I moved on, should have checked timing mark with screwdriver in cyl 1 first, but took a quick look and moved on.
Love the locking options, plenty of steel/aluminum on hand but have to run out for the G5 or G8 bolts. No worries, Dunkin is in the same lot as Tractor Supply and it's about this time of day the second hot batch of krullers come out. mmmmm.... Will update (hopefully with pictures if I can keep my head on straight) to add to the photo catalog.
Love the locking options, plenty of steel/aluminum on hand but have to run out for the G5 or G8 bolts. No worries, Dunkin is in the same lot as Tractor Supply and it's about this time of day the second hot batch of krullers come out. mmmmm.... Will update (hopefully with pictures if I can keep my head on straight) to add to the photo catalog.