Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Sealing the CMP?
#10
I replaced the Chinese CMP with an SMP CMP - this immediately stopped the leak. No more issues.

On the SMP CMP I did grease the O-ring with silicon grease as you suggested. I had not done that on the Chinese/Import Direct CMP. That said the O-ring on the SMP was larger and protruded outward to a greater extent than the Import Direct. Finally, when I inserted the SMP CMP into the hole, it fit snuggly unlike the Import Direct.

I just returned from 10 days of extended operations with the Tracker and had zero issues. I am a happy camper.

Take care,

Joe Tracker
Reply


Messages In This Thread
Sealing the CMP? - by Joe Tracker - 04-14-2018, 03:18 AM
RE: Sealing the CMP? - by fixkick - 04-14-2018, 04:11 AM
RE: Sealing the CMP? - by Joe Tracker - 04-14-2018, 06:20 AM
RE: Sealing the CMP? - by Joe Tracker - 04-14-2018, 10:56 PM
RE: Sealing the CMP? - by fixkick - 04-14-2018, 11:41 PM
RE: Sealing the CMP? - by fixkick - 04-14-2018, 11:51 PM
RE: Sealing the CMP? - by fixkick - 04-14-2018, 11:53 PM
RE: Sealing the CMP? - by Joe Tracker - 04-15-2018, 12:59 AM
RE: Sealing the CMP? - by fixkick - 04-20-2018, 10:35 PM
RE: Sealing the CMP? - by Joe Tracker - 04-28-2018, 06:27 AM
RE: Sealing the CMP? - by fixkick - 04-28-2018, 08:38 AM

Forum Jump:


Users browsing this thread: 2 Guest(s)