Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Brakes not fitting
#1
Hello I have a 1990 geo tracker 2 door from canada.

I just purchased it drove it home and have been working on a few things.

I noticed the old brakes needed some love so for the front i bought new hoses, calipers, rotors and pads.

When the rotor is fully seated the caliper bracket is hitting the rotor. I am unable to bolt the bracket on with the rotor without shimming the bracket with a washer or two and that doesn't sound safe. The old brakes looked to have the same issue and the tabs that you bolt the bracket too do not seem to be bent.

Napa part numbers on the calipers are SE-1763A (RIGHT) AND SE-1764A (LEFT)

This is an issue on the right side and looks like it will be an issue on the left side as well.

Thanks,
Jack
Reply


Messages In This Thread
Brakes not fitting - by jackhealy - 03-31-2018, 01:30 AM
RE: Brakes not fitting - by fixkick - 03-31-2018, 03:53 AM
RE: Brakes not fitting - by jackhealy - 03-31-2018, 06:32 AM
RE: Brakes not fitting - by fixkick - 03-31-2018, 09:28 AM
RE: Brakes not fitting - by fixkick - 03-31-2018, 09:31 AM

Forum Jump:


Users browsing this thread: 2 Guest(s)