omg that is wild zip tied to STABL. bar.. wow.
and yes a new thermostat is very good, even ones that are old and only slow , now the engine warms up faster, (good) and passengers get heat faster, lots faster.
The CAT converter lasts longer, no overheated from slow warmup.
p0125 Pendings. I think i this case it's an old code. means slow warm up, or more complex causes. (like bad 02 sensor front)
all that means is its real but not set yet, some codes take up to 3 driving cycles to set, (store)
your data looks good.
now the misfire monitors are working for the first time since, Mr, Tie warp did his deed.
if it has full power up hills hot, it's a runner.
to erase old DTC error codes. (history)
1: pull the dome fuse. for 1min or so, put back fuse.
2: push reset with the scan tool
3: drive them off, can take 3 driving cycles to drive off many DTC errors, this is the painful way. works though.
if any of those fail to clear a DTC error, it means it's real.
and yes a new thermostat is very good, even ones that are old and only slow , now the engine warms up faster, (good) and passengers get heat faster, lots faster.
The CAT converter lasts longer, no overheated from slow warmup.
p0125 Pendings. I think i this case it's an old code. means slow warm up, or more complex causes. (like bad 02 sensor front)
all that means is its real but not set yet, some codes take up to 3 driving cycles to set, (store)
your data looks good.
now the misfire monitors are working for the first time since, Mr, Tie warp did his deed.
if it has full power up hills hot, it's a runner.
to erase old DTC error codes. (history)
1: pull the dome fuse. for 1min or so, put back fuse.
2: push reset with the scan tool
3: drive them off, can take 3 driving cycles to drive off many DTC errors, this is the painful way. works though.
if any of those fail to clear a DTC error, it means it's real.
http://www.fixkick.com