Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Totally confused
#4
Went and checked the compression again . found I had none . so I started looking and found that there is two letter E on the cam gear . one on the outer ring one at the bolt . I had been using the one on the outer like all of the directions had showed doing. But that doesn't work moved to the one by the bolt in the center which has the letter I on the outer ring and I have compression and it started and ran perfect .
Reply


Messages In This Thread
Totally confused - by Dcoaks - 02-05-2018, 03:21 AM
RE: Totally confused - by fixkick - 02-05-2018, 04:18 AM
RE: Totally confused - by Dcoaks - 02-05-2018, 07:21 AM
RE: Totally confused - by Dcoaks - 02-06-2018, 12:19 AM
RE: Totally confused - by fixkick - 02-07-2018, 03:18 AM
RE: Totally confused - by fixkick - 02-07-2018, 03:20 AM
RE: Totally confused - by Dcoaks - 02-10-2018, 09:06 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)