16v 1.6L Bad bog questions

[CSUSBgeochem1]

Ok kick I went ahead and continued testing fuel pump and found that it’s leaking down too fast. Does not hold 20 psi for a minute. Shunt test was solid and even went to 80psi but held at 40 strong. I first unplugged all fuel injectors and measured ohms reading. Every one was at 13.7 ohms. I know your site says 10 but the cHilton manual says they are good from 12-16. Next I tested for leak down and even with them all unplugged the psi still drops. I checked all cylinders one by one to check if I could see wetness or spray with the plugs removed and nothing that looks liked wet flowing gas. I even went so far as to key on each time I checked and Did not see spray. So I replaced the fuel pressure regulator with the old one (old one was still good, mityvac needed rebuilt) and it held better but still not at 25psi. Any other things I can do to see if the injectors are leaking? Remember the pump assembly is all brand new.