09-27-2017, 09:46 PM
(09-27-2017, 12:32 PM)Ziggyz Wrote: I plotted the coarse through the manuals. its going to be big job. before I start Im going to go in with a scope and see if there is someway to preform a micro surgery and see if there is a way to epoxy it or something before i tear it all apart. Any help on where to get a new box?
Thanks for you help..
id do same then look at what is actually borken inside ,see if there an easy cure.
check this out.
put in 99 geo, + heater
http://www.car-part.com/cgi-bin/search.cgi
http://www.fixkick.com