10-12-2017, 08:18 AM
(10-09-2017, 10:25 PM)fetcher Wrote: Don't use compression fittings. They are likely to leak. You can also get a hose made up by a hydraulics shop. That, along with a new pump
will do the trick without having to buy special tools.
Hi, ( i was away for a few days) Yes good ideas-I read them all- I'll look around for a shop-to see what they can do. Another thought I was pondering & probably wind up doing is to leave the hose connected to the pump & hanger since its a solid connection with no leaks and just switch out with a new pump and inside tank pump hose & filter . The hanger looks brand new- Tank inside is clean --meanwhile I'm restoring the old gas filter bracket - it has seen better days--finally got that off-going to reinforce it and put it back.
Thx fetcher for your input
98TrackerMan
