Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
1996 Geo Tracker Spindle & Hub same as 1998?
#14
ok, I read every page in the EPC(world parts cat , 89-2004)

the facts are here, and explains why finding used parts is a HAIR PULLER, its the vin serial that mattters. and door counts. and you never told me 4doors. not yet.
is your car fitted with needles. I assume yes,. no photos presented, but id guess are there. (if the inboard hub is totally destroyed, i can see why be impossible to tell but ive not looked at it.
looking matters always.
is your car 4doors?. seems so but you never said, what is your VIN so I can decode all that, post the VIN and put X' on last 3 digits, for privacy. no big deal here,


here is the rule on all inner hubs , suzuki rules only,.,.. the suzuki book shows needle options on 2wd, that is JAPAN brain fart there. there are no live axles in 2wd.. oops.


4WD


4wd, 2 and 4 door rules to follow, wish had your vin or photo car, all i know is tracker 96/4wd...little else.

then needles.. are using on 4door T4100158~ or T4108881~ only 4wd and only 4doors. the tilde ~ means and UP, the 2 serial numbers or due to 2 different body classes used 4doors, and is,.
I do know the reason for 2 Vins above, the left is G16 engine, right is J18 engine (SPORT). so only the left vin serial applies to you. 158 and up (my wild guess is the 15,800 car up made at cami? ) (so 96s are only found by VIN !!!)
T means 1996 year model.

the only 2door with needles is 1997, and only ABS , very limited this... had to find, with ABS. ABS was and expensive option there, and rare, and may be suzuki ERRATa

The 4door is the hubs to find, and only if newer 96s. later Vins
so 97 and 98 4door are prime targets.

now the real p/n from real suzuki, inward hub with bearing.

43441-60a20 $167 at Suzuki drawing ID 34-1.
https://www.suzukicarparts.com/parts/199...eid=214820

tiny needle bearing.
09263-28030 (used on other suzuki too)


https://www.suzukicarparts.com/parts/199...eid=214820


the outer bearing in the main hub , outboard, is a crush bearing, see my wheel bearing pages, it covers this special bearing 100% .

so in conclusion, no VIN ,no JOY.

IF GM was not dead, they'd ask that 1st thing,
if at SUZUKI, the do ask but GEO VINs are useless there. but i can decode them, of posted. so.................................
http://www.fixkick.com
Reply


Messages In This Thread
RE: 1996 Geo Tracker Spindle & Hub same as 1998? - by fixkick - 06-17-2017, 04:11 AM

Forum Jump:


Users browsing this thread: 2 Guest(s)