05-23-2017, 07:26 AM
Got a 93 Geo Tracker. After much troubleshooting for no start, found injector not working as not receiving power from ECU. Bypassed (through 5A fuse) power to injector, and car runs no problem. Took out ECU, see photos attached or posted here photos.
Is that capacitor (C48) involved in driving the 12V to injector?
Is it ok to just run a new 12V line to injector (through 5A fuse)?
Can that cap be replaced (way beyond my skillz).
Anything else that could stop 12V to injector?
Is that capacitor (C48) involved in driving the 12V to injector?
Is it ok to just run a new 12V line to injector (through 5A fuse)?
Can that cap be replaced (way beyond my skillz).
Anything else that could stop 12V to injector?