04-10-2017, 09:05 AM
My x-90 is a 96 model 4X4 5 spd. G16b engine. I think I can get another complete engine and I want to match all the ports and polish it. maybe a 92MM throtal body...
Dreamer !!
It's lifted about 5" and has a doug thorly header and a 2-1/2 inch exhaust. Stock replacement K&N air filter
I can do most any thing on the car, I was a machinist for 45 years but I'm 63 and retired, old ugly and smell bad... and lazy.
I've got the suzuki parts manual and that helps a lot.
The mechanic on the trans/clutch was pretty good but I pushed him to get it done so I'll take the blame on this one.This is a little town and a good mechanic is really hard to find. I'm shure you've had your dealins as well.
I'll replace the cable and the spring etc. I can get them from trail tough or 83 high suzuki salvage etc. May even call the subuaru dealer here. Their the old suzuki dealer and he knows me and can still get some parts from zuki.
Another question, Can I replace the engine pan gasket without droppin the axle ?
Also, like I said I have the parts manual so I I have the STOCK numbers. Do any of you know where I can get all the (push Pin) fasteners for the interior ?
I need to replace the carpet and they are pretty much one time use things.
Any way ,as I told ya I'd bug ya to death askin dumn stuff but I sure appreciate you help
Thanks
Where's the damn send button
Dreamer !!
It's lifted about 5" and has a doug thorly header and a 2-1/2 inch exhaust. Stock replacement K&N air filter
I can do most any thing on the car, I was a machinist for 45 years but I'm 63 and retired, old ugly and smell bad... and lazy.
I've got the suzuki parts manual and that helps a lot.
The mechanic on the trans/clutch was pretty good but I pushed him to get it done so I'll take the blame on this one.This is a little town and a good mechanic is really hard to find. I'm shure you've had your dealins as well.
I'll replace the cable and the spring etc. I can get them from trail tough or 83 high suzuki salvage etc. May even call the subuaru dealer here. Their the old suzuki dealer and he knows me and can still get some parts from zuki.
Another question, Can I replace the engine pan gasket without droppin the axle ?
Also, like I said I have the parts manual so I I have the STOCK numbers. Do any of you know where I can get all the (push Pin) fasteners for the interior ?
I need to replace the carpet and they are pretty much one time use things.
Any way ,as I told ya I'd bug ya to death askin dumn stuff but I sure appreciate you help
Thanks
Where's the damn send button