1.6 Swap Injecton problem

[loe92]

[quote='loe92' pid='8297' dateline='1495733811']
HI Man,

I don't know why, but my car now, seems working well, In the past weeks i used to regulate again the TPS and i switched to another injector.
At the beginning i used a bit the car and it had still the Hesitation, After some KM the car starts to go well by itself (BAD FUEL MAYBE ? WHO KNOWS).

I Just have a last question, Can i weld on my Custom Exhaust the 1.3 Catalytic Converter o i need to find a 1.6 Catalytic Converter?

I don't have a nice CO and i want to try to improve that.


my guess bad fuel or the new fuel cleaned out the injector but is all good news, congrats !!!\

sure you can use any exhaust setup. so long as
1: IT HAS BACK pressure at CAT to EGR works, if you want it to work.
2: cat is there., sure,
3: O2 in the correct spot like stock.,
4: any 3 way cat, and the more forward the better, (usually only California issue this) this makes it warm up faster and pass smog, some cars its goes too cold at idle too fast and can fail smog that way.
3ways, HC, CO and EGR NOX ..


im so happy you got this beast going, nice work!!!!

I have this on the car.    

I want to Weld the CAT, after the Lambda sensor on the CONE that you can see in the picture

Man of course if you didn't help me with your advices and you're great technical informations i couldn't do anything.

You've a very big knowledge and i thank you again for your HELP.

If i will come to USA i'll find you just to shake your hand!!!!


(i don't know why i wrote "i used to regulate again the TPS" i meant to say I adjusted again the TPS LOOOL)