11-14-2016, 06:17 PM
(This post was last modified: 11-14-2016, 06:20 PM by rasmeidirt.)
I purchased a digital multimeter to test my TPS. My question is the simple basic use.
There are two wires, one is red and one is black. Where do they connect to. There are four slots on the body. one is 20A, one is Temp A mA, one is COM and one is VΏHz. There is a big switch in the middle, where do I switch it to?
There are two wires, one is red and one is black. Where do they connect to. There are four slots on the body. one is 20A, one is Temp A mA, one is COM and one is VΏHz. There is a big switch in the middle, where do I switch it to?