Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
What fault is set for a power steering pressure sensor on a 1992 Sidekick 4door?
#1
Just wondering. I replaced a power steering pump front pulley seal and noticed the pressure sensor wire was not connected. Should I connect it? Is there a fault I can look for?
1992 Sidekick, 4 door, 4-spd automatic, 1.6 L, 16 V, MPI
Reply
#2
the ps , sensor is steering overload
and cause ecu to raise, rpm from 800 to 1000 hot.
only happens lock to lock or at curbs force tire very hard into a curb/
http://www.fixkick.com
Reply
#3
Thank you.
1992 Sidekick, 4 door, 4-spd automatic, 1.6 L, 16 V, MPI
Reply
#4
your welcome and good luck and Cheers !
http://www.fixkick.com
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)