Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Where do these hoses go?!
#1
Hello:
I changed my son's sidekick's engine. I have managed to put everything back to the correct locations and hook ever hose up, with the exception of the two hose shown in attached pictures.

I have looked through two manuals that I have, and spent one hour on the Internet, but could not any leads.

Could someone tell me (or hopefully show me a picture), as where these hoses should be connected to? I believe they should be brake vacuum hoses?

Thank you in advance.
The cut-nut


Attached Files Thumbnail(s)
       
[color=#800080][b]91 Sidekick JX, 8V, S. Carolina Car, 2 dr, 3 speed Auto Trani, Halifax, NS, Canada[/b][/color]
Reply
#2
off my find parts page

http://www.fixkick.com/sensors/8v-intake.JPG


it heats the fresh air to the ISC valve , faster warmups.

part 18 is fresh air from the intake tube
22 goes to ISC nipple top left. its only an air heater, might prevent icing too.
http://www.fixkick.com
Reply
#3
God bless you fixkick!

Would you know the size of the nut that holds power steering pully to engine. It looks either M12x1.25 or M12x1.5. I have LOST it!!
Cheers,
Zackman
[color=#800080][b]91 Sidekick JX, 8V, S. Carolina Car, 2 dr, 3 speed Auto Trani, Halifax, NS, Canada[/b][/color]
Reply
#4
nut? pulley?
not sure what part of P/S
is there but one part that size?

buy 2 bolts that size ,both ISO pitches, and bingo found it, or use your scrap box of bolts, find size that fits. and use the pitch gauge to measure it?

the suzuki parts lists do not cover size... (ignorance makes them rich)
http://www.fixkick.com
Reply
#5
Hi Fixkick:
I am talking about the bolt holding teh pulley in attached picture?
Cheers,
Zackman


Attached Files Thumbnail(s)
   
[color=#800080][b]91 Sidekick JX, 8V, S. Carolina Car, 2 dr, 3 speed Auto Trani, Halifax, NS, Canada[/b][/color]
Reply
#6
the pump is off walk in to any store that sells, metric nuts
its only 2 ISO sizes.
one fits.
ace home centers. even in metric SST, (nice idea that in some cases) stainless steel...
all napa stores.
all autostores have metric section.
1.75 1.25
one fits. i dont have a pump here or would measure it.
i have pitch gauge.

http://www.lowes.com/pd_576750-281-12016...d=50146288

one of my most useful tools... working any rice cars.
http://www.fixkick.com
Reply
#7
Many thanks Fixkick!
Will do as suggested.
Cheers,
Zackman
[color=#800080][b]91 Sidekick JX, 8V, S. Carolina Car, 2 dr, 3 speed Auto Trani, Halifax, NS, Canada[/b][/color]
Reply
#8
i hope its only dirty.

cheers.!
http://www.fixkick.com
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)