Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
stripped threads
#1
help! stripped threads where tensioner pulley bolts into. 1996 geo tracker. tightens but not enough. any suggestions?
Reply
#2
(03-06-2017, 01:27 PM)Jerry Wrote: help! stripped threads where tensioner pulley bolts into. 1996 geo tracker. tightens but not enough. any suggestions?

a Helicoil™ fix is way more costly than a new water pump.


http://www.repairengineering.com/helicoil.html
http://www.fixkick.com
Reply
#3
in fact most shops do the pump at belt time
they are near same life spans.... is why. (under the logic , why do the job twice?)
http://www.fixkick.com
Reply


Forum Jump:


Users browsing this thread: 3 Guest(s)