+- Car Repair Forum (https://fixkick.com/forum)
+-- Forum: Suzuki (https://fixkick.com/forum/forum-suzuki)
+--- Forum: Sidekick/Tracker (https://fixkick.com/forum/forum-sidekick-tracker)
+--- Thread: 1.6-16V Engine Oil Dipstick Tube O-ring (/thread-1-6-16v-engine-oil-dipstick-tube-o-ring)
1.6-16V Engine Oil Dipstick Tube O-ring - Ed-Mc - 04-07-2016
Any idea the size of the dipstick tube O-ring or maybe even a part number? I couldn't find a listing for that part at a Suzuki parts site.
If not available from factory, hopefully I can match up with something at the auto parts store.
Thanks........ed
RE: 1.6-16V Engine Oil Dipstick Tube O-ring - Trackerman96 - 04-08-2016
09280-10016
TM96
RE: 1.6-16V Engine Oil Dipstick Tube O-ring - Ed-Mc - 04-08-2016
(04-08-2016, 06:36 AM)Trackerman96 Wrote: 09280-10016
TM96
Thanks for the part number! Turns out this O-ring is used in Suzuki cars, motorcycles, quads, and outboards. So it's available all over the place.
I found a reasonably-priced part with cheap shipping on eBay, and it's on the way!
Cheers.......ed
RE: 1.6-16V Engine Oil Dipstick Tube O-ring - Trackerman96 - 04-09-2016
Glad I could help.
TM96
RE: 1.6-16V Engine Oil Dipstick Tube O-ring - fixkick - 04-15-2016
that is true , many o-rings are for many cars. Suzuki and others. (fit Suzuki ATVs , motor cycles and more.) and is one very common ring size.
and there are only a few sizes used, outside of transmission
it fits over 9 pages, of cars, in the SUZUKI data base alone on just cars. even fits the J20 engines.
they are all metric.
some I have measured, (as is this case)
our parts list USA fail to say the sizes so i measured mine.
but other, in Europe do.
here is my hard to find parts, page
http://www.fixkick.com/buy-parts.html
if you type control +F (find)
and type o-ring in the box
you will see all reversed engineered o-rings by me and others.
the ring does come in the FELpro, full engine kit. so never order a viton swap.
what i do is mike the rings
then look them up in oringsusa.com
buy a ring there for 10cent
or upgrade to viton, for $5o cents and it lasts for near ever.
off my hard to buy page it states
My measurements and estimates...:' for got it was here, put there 10 years ago.... water under bridge?
Dip stick tube : CS=0.075 (2mm) ID: 0.388 [9.8mm) [I say 10mm ] Suz PN: 09280-10016 $1.65
Rear Water pump to rear pipe: CS= 0.138 (3.5mm) ID=1.093 (27.8mm) [ I say 28mm ] Suz PN: 09280-28008 $1.50
so is just a 10mm ID ring,
the thinkness is 2mm
so any 2mm x10mm fits
here is the 50cent, viton
http://www.oringsusa.com/catalog/product_info.php/cPath/1006_489/products_id/489256
ships lightning fast , by computer automation.
they have a min order on some rings now, this one is 10.